Equipment
Small / Medium Format Equipment
Chemence produce a full range of machinery for the processing of liquid photopolymer plates ranging from small stamp text plates to large format flexographic cliches.
The following machines are designed for hand stamp manufacture and small-scale production of flexographic plates.
Verbatim C1623 Compact Plate making System
(16 x 23 inches / 40 x 58cms)
EQUIPMENT DIMENSIONS AND TECHNICAL DATA
This small format system meets the requirements of Converters who wish to change from stereo rubber printing blocks to flexo plates. This 3 in 1 compact system comes with safety limit switched for the UV lamp.
Verbatim C2232 Plate making System
(22 x 32 inches / 55 x 81 cms)
EQUIPMENT DIMENSIONS AND TECHNICAL DATA
This small format liquid photopolymer plate making system is designed for producing small plates for the corrugated printing industry. It is simple to operate and capable of producing plate after plate with very tight gauge tolerance. This machine includes two separate units for washout / drying and post-exposure.
Exposure Unit:
-
Small Consistent UV exposure
-
One button operating system enables low operating labour costs.
-
Built for easy maintenance – easy access to circuitry and lamps.
-
Two-programmable pre-set exposure timing for different plate thicknesses eliminate guess work.
Washout Unit:
Verbatim C3050 Plate making System
(30 x 50 inches / 76 x 127 cms)
EQUIPMENT DIMENSIONS AND TECHNICAL DATA
This medium format system consists of main exposure unit, wash-out / dryer system and post-exposure unit.
There are two options – manual and automatic, with the latter providing auto-dispense for the resin and auto-laminating for basefilm application.
-
Air cylinder lift system for upper light box.
-
Temperature control for lower glass.
-
Ventilation system maintains stable light intensity
-
PLS for accurate and easy operation
-
External filter systems provide improved wash-out.
-
Built in heater rod maintains ideal temperature.
Large Format Equipment
Chemence produce a full range of machinery for the processing of liquid photopolymer plates ranging from small stamp text plates to large format flexographic clichés.
The following two machines are designed for large-scale manufacture of flexographic printing plates. Chemence’s dedication to the liquid plate making industry includes the introduction of new plate making systems incorporating technological advancements. These are the industry’s first newly designed liquid plate systems in nearly 10 years. They incorporate features that improve plate quality, operator efficiency and plate production cost.
Features:
Exposure Unit
-
Pressurized Dispense of resin
-
Heavy Duty Construction
-
Use of readily available components and complete list supplied.
-
Complete electrical drawing package included
-
Quick change shim system
-
Highly repeatable shim system
-
Easy clean shim system
-
High efficiency centre tank mixers
-
Head room for 6ft 2ins under top glass
-
Complete system fits under an 8 ft ceiling
-
Adjustable manifold doctor blade profile
Washout / Post Exposure / Dyer / Finishing Unit
-
In-line ‘all-in-one’ unit
-
Clean and easy movement between washout, post exposure and dryer.
-
Easy removable spray bars in washout bath.
-
Washout bath skimmer and circulation system to remove floating debris
-
Easy access to post exposure lamps
-
Easy access to pumps
-
Greatest face rinse ability
-
Adjustable spray volume
-
High wattage heater
-
Safety system on germicidal finishing unit door.
-
Easy access to germicidal finishing lamps.
Reclaim
Rotary Air Knife
-
Clean movement between Air Knife and Washout
-
Low maintenance filter system
-
Industry highest polymer recovery rates
-
Easy access pump service
-
Low noise design
Reclaim Board
Verbatim 4460 Plate making System
(44 x 60 inches / 111 x 152 cms)
EQUIPMENT DIMENSIONS AND TECHNICAL DATA
Verbatim 5280 Plate making System
(52 x 80 inches / 132 x 203 cms)
EQUIPMENT DIMENSIONS AND TECHNICAL DATA
 
| 
